|
When The Stabilizor® is used to remedy foundation failures in existing homes, the installation works like this:
- An excavation is made at a strategic point beside the foundation to a depth just beneath the foundation.
- Using a torque motor, installers screw a helical pile into the ground next to the foundation.
- When the pile is in place, the top is sawed off at a height to ensure no components are visible above ground.
- Installers position the articulating bracket and attach a hydraulic ram jack to the top of the bracket. The jack then lifts the foundation back into place and the bracket is locked into its required position.
- The Stabilizor® has repaired the foundation and closed the cracks.
|
Existing Homes